| Parametric exploration on the airfoil design space by numerical design of experiment methodology and multiple regression model |
Li, XX |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY |
2020 |
| Operation strategy of interconnected combined cooling, heating, and power systems based on exergoeconomic analysis |
Liu, H |
JOURNAL OF CLEANER PRODUCTION |
2020 |
| Test platform and experimental test on 100 kW class Printed Circuit Heat Exchanger for Supercritical CO2 Brayton Cycle |
Zhou, JZ |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER |
2020 |
| A biogas-fired cogeneration system based on chemically recuperated gas turbine cycle |
Su, BS |
ENERGY CONVERSION AND MANAGEMENT |
2020 |
| Investigation of the riser cross-sectional aspect ratio effect on the flow dynamics in circulating fluidized beds by electrical capacitance tomography |
Tu, QYY |
TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL |
2020 |
| Study on the Effects of Dome Fuel Distribution Ratio on Lean Blowout of a Model Combustor |
Shen, XM |
JOURNAL OF THERMAL SCIENCE |
2020 |
| Active regulation for improving the off-design conditions of distributed combined cooling, heat and power system |
Shao, YY |
ENERGY REPORTS |
2020 |
| Investigation of variable orifice plate design for centrifugal compressor low-end performance improvement |
Zhao, B |
AEROSPACE SCIENCE AND TECHNOLOGY |
2020 |
| Experimental investigations of the spray structure and interactions between sectors of a double-swirl low-emission combustor |
Fan, XJ |
CHINESE JOURNAL OF AERONAUTICS |
2020 |
| Operational performance characteristics of a novel fluidized bed with the internal separator for pulverized coal self-sustained preheating |
Song, WH |
POWDER TECHNOLOGY |
2020 |
| Influence of metakaolinization temperature on the structure and activity of metakaolin supported Ni catalyst in dry methane reforming |
Ayodele, OB |
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING |
2020 |
| Experimental Investigations of the Flow Field Structure and Interactions between Sectors of a Double-Swirl Low-Emission Combustor: Effects of Main Stage Swirl Intensity and Venturi Angle |
Fan, XJ |
JOURNAL OF THERMAL SCIENCE |
2020 |
| Support effect on the catalytic activity and stability of non-crystal ternary oxides |
Waqas, M |
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS |
2020 |
| Thermodynamic analysis of isothermal CO2 splitting and CO2-H2O co-splitting for solar fuel production |
Hao, Y |
APPLIED THERMAL ENGINEERING |
2020 |
| Counter-rotating dual-stage swirling combustion characteristics of hydrogen and carbon monoxide at constant fuel flow rate |
Zeng, QH |
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY |
2020 |
| Multipoint design optimization for a controlled diffusion airfoil compressor cascade |
Huang, S |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE |
2020 |
| Synthesis and Characterization of Disodium Hydrogen Phosphate Dodecahydrate-Lauric-Palmitic Acid Used for Indoor Energy Storage Floor Units |
Xu, Q |
JOURNAL OF THERMAL SCIENCE |
2020 |
| Transmission characteristics of exergy for novel compressed air energy storage systems-from compression and expansion sections to the whole system |
Guo, H |
ENERGY |
2020 |
| A spectral-splitting photovoltaic-thermochemical system for energy storage and solar power generation |
Ling, YY |
APPLIED ENERGY |
2020 |
| Sulfur conversions during coal char gasification with a two-stage air supply in a pilot-scale circulating fluidized bed gasifier |
Chai, Z |
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS |
2020 |
| Effect of Co content on [Ca2CoO3-delta](0.62)[CoO2] thermoelectric properties |
Li, YN |
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS |
2020 |
| Computational Investigation of Flow Control Methods in the Impeller Rear Cavity |
Liu, G |
INTERNATIONAL JOURNAL OF AEROSPACE ENGINEERING |
2020 |
| Mechanical Properties and Energy Absorption Capability of ARCH Lattice Structures Manufactured by Selective Laser Melting |
Ding, RC |
ADVANCED ENGINEERING MATERIALS |
2020 |
| The performance of a centrifugal compressor with a tandem impeller in off-design conditions |
Li, ZL |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY |
2020 |
| Innovative NOx reduction from cement kiln and pilot-scale experimental verification |
Cai, J |
FUEL PROCESSING TECHNOLOGY |
2020 |
| Rapid oxide sintering by concentrated solar power: A case study of lanthanum calcium ferrite |
Lin, PZ |
CERAMICS INTERNATIONAL |
2020 |
| Gas-Solid Interfacial Heat Transfer Characteristics of Uncoated and Coated Metal Foams for Both Laminar and Turbulent Flow Regimes |
Peng, WP |
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME |
2020 |
| Molecular dynamics study on the thermal conductivity of bilayer graphene with nitrogen doping |
Zhang, XL |
SOLID STATE COMMUNICATIONS |
2020 |
| Numerical Investigation on the Effects of Cavity-Blowing Jet on Intermediate Turbine Duct Flowfield |
Liu, J |
INTERNATIONAL JOURNAL OF AERONAUTICAL AND SPACE SCIENCES |
2020 |
| Flow visualization and transient behavior analysis of luminescent mini-tufts after a backward-facing step |
Chen, L |
FLOW MEASUREMENT AND INSTRUMENTATION |
2020 |
