| NO(x)emissions of pulverized coal combustion in high-temperature flue gas |
Zhu, SJ |
ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING |
2020 |
| Experimental Study on Thermal Conductivity and Rectification in Suspended Monolayer MoS2 |
Yang, X |
ACS APPLIED MATERIALS & INTERFACES |
2020 |
| Theoretical and experimental study on effects of humidity on centrifugal compressor performance |
Sun, JT |
APPLIED THERMAL ENGINEERING |
2020 |
| Characteristic map of working mediums in closed loop two-phase thermosyphon: Thermal resistance and pressure |
Bai, Y |
APPLIED THERMAL ENGINEERING |
2020 |
| The combustion and NOx emission characteristics of the ultra-low volatile fuel using the novel pulverized coal self-sustained preheating combustion technology |
Song, WH |
FUEL |
2020 |
| Effects of the tertiary air injection port on semi-coke flameless combustion with coal self-preheating technology |
Liu, W |
FUEL |
2020 |
| Crosslinker length dictates step-growth hydrogel network formation dynamics and allows rapid on-chip photoencapsulation |
Jiang, ZL |
BIOFABRICATION |
2020 |
| A novel self-adaptive control strategy of frost prevention and retardation for air source heat pumps in winter conditions |
Tang, JC |
APPLIED MATHEMATICAL MODELLING |
2020 |
| Performance investigation of a combined cycle power system with concentrating PV/thermal collectors |
Wu, HF |
SOLAR ENERGY |
2020 |
| Synergy analysis of the internal flow resistance and application in axial-inflow turbine |
Shao, ZY |
AEROSPACE SCIENCE AND TECHNOLOGY |
2020 |
| Slagging characteristics caused by alkali and alkaline earth metals during municipal solid waste and sewage sludge co-incineration |
Zhao, J |
ENERGY |
2020 |
| Investigation of a double-PCM-based thermoelectric energy-harvesting device using temperature fluctuations in an ambient environment |
Liao, XZ |
ENERGY |
2020 |
| Heat transfer performance of supercritical pressure CO2 in a non-uniformly heated horizontal tube |
Zhang, HY |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER |
2020 |
| Dynamic surface heat transfer and re-attachment flow measurement using luminescent molecular sensors |
Chen, L |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER |
2020 |
| Interval Optimization-Based Optimal Design of Distributed Energy Resource Systems under Uncertainties |
Li, D |
ENERGIES |
2020 |
| Analysis of Shroud Cavity Leakage in a Radial Turbine for Optimal Operation in Compressed Air Energy Storage System |
Shao, ZY |
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME |
2020 |
| Flow dynamics of dual-stage counter-swirl combustor in different confinement spaces |
Zeng, QH |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2020 |
| Investigation on the Mechanism of Drag Modification over Triangular Riblets |
Zhang, MM |
JOURNAL OF APPLIED FLUID MECHANICS |
2020 |
| Electric-Field-Assisted Growth of Vertical Graphene Arrays and the Application in Thermal Interface Materials |
Xu, SC |
ADVANCED FUNCTIONAL MATERIALS |
2020 |
| Nanoporous (00l)-oriented Bi2Te3 nanoplate film for improved thermoelectric performance |
Wu, ZH |
JOURNAL OF ALLOYS AND COMPOUNDS |
2020 |
| Investigation on the heat transfer coefficient and uniformity in a polygonal furnace of a 350 MW supercritical CFB boiler |
Yang, Z |
APPLIED THERMAL ENGINEERING |
2020 |
| Advanced exergy analysis of an integrated energy storage system based on transcritical CO2 energy storage and Organic Rankine Cycle |
Zhang, Y |
ENERGY CONVERSION AND MANAGEMENT |
2020 |
| Chemical Looping Combustion over a Lanthanum Nickel Perovskite-Type Oxygen Carrier with Facilitated O2- Transport |
Jiang, QQ |
ENERGY & FUELS |
2020 |
| Application of electrical capacitance tomography in circulating fluidised beds - A review |
Wang, HG |
APPLIED THERMAL ENGINEERING |
2020 |
| Single-Crystal SnSe Thermoelectric Fibers via Laser-Induced Directional Crystallization: From 1D Fibers to Multidimensional Fabrics |
Zhang, J |
ADVANCED MATERIALS |
2020 |
| Designer patterned functional fibers via direct imprinting in thermal drawing |
Wang, Z |
NATURE COMMUNICATIONS |
2020 |
| Investigation of gas-solids flow hydrodynamics in a cold model of a dual fluidised bed gasifier using electrical capacitance tomography sensors |
Luo, Z |
PARTICUOLOGY |
2020 |
| Mo-interlayer-mediated thermal conductance at Cu/diamond interface measured by time-domain thermoreflectance |
Chang, G |
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING |
2020 |
| The impact of additives upon the slagging and fouling during Zhundong coal gasification |
Fan, YQ |
JOURNAL OF THE ENERGY INSTITUTE |
2020 |
| Standard thermodynamic properties for the energy grade evaluation of fossil fuels and renewable fuels (vol 147, pg 2160, 2020) |
Huang, WJ |
RENEWABLE ENERGY |
2020 |
